Product Details
Product Details
Product Specification
Usage |
Specimen Requirements 1. Specimens should be extracted as soon as possible after collection. Extraction procedures should be performed according to relevant literature, and experiments should be performed as soon as possible after extraction. If experiments cannot be performed immediately, specimens can be stored at -20°C, but repeated freezing and thawing should be avoided. 2. Samples containing NaN3 cannot be tested because NaN3 inhibits horseradish peroxidase (HRP) activity. Procedure 1. Dilution of Standard: This kit provides one standard sample at full strength. Users can dilute the sample in a small test tube according to the following chart. 16ng/ml |
No. 5 standard |
150μl of the original standard was added to 150μl of the standard diluent |
|||||
8ng/ml |
Standard No. 4 |
150μl of Standard No. 5 was added to 150μl of Standard Diluent |
||||||
4ng/ml |
Standard No. 3 |
150μl of Standard No. 4 was added to 150μl of Standard Diluent |
||||||
Standard No. 2 |
150μl of Standard No. 3 was added to 150μl of Standard Diluent |
|||||||
1ng/ml |
Standard No. 1 |
|||||||
Cat |
Component name |
96T |
Serial number |
Component name |
96T |
|||
1 |
30 times concentrated washing liquid |
20ml×1 bottle |
6 |
Developer B solution |
6ml×1/bottle |
|||
2 |
Enzyme label reagent |
6ml×1 bottle |
7 |
Enzyme-labeled coated plate |
12 wells×8 strips |
8 |
Standard product (32ng/ml) |
0.5ml×1 bottle |
4 |
Sample diluent |
6ml×1 bottle |
9 |
Standard diluent |
1.5ml×1 bottle |
|||
5 |
Developer A solution |
6ml×1 bottle |
10 |
Sealing film |
2 sheets |
5. The sealing film is for single use only to avoid cross contamination.
6. Please store the substrate in a dark place.
7. Strictly follow the instructions for operation. The test results must be determined based on the readings of the microplate reader.
8. All samples, washing solutions and various wastes should be treated as infectious materials.
9. Components of different batches of this reagent must not be mixed.
