Product Details
Product Details
Product Specification
| protein | PTH | ||||||||||||||||||||||||||||||
| Usage |
1. Sample handling and requirements 1. Serum: 2. Plasma: 3. Tissue homogenate: 4. Cell culture supernatant or other biological specimen: Note: Hemolysis of the specimen will affect the final test result, so hemolyzed specimens should not be tested. Two, Reagent Preparation The kit should be removed from the refrigerated environment and equilibrated at room temperature before use. 20× Dilution of wash buffer: distilled water according to 1 : 20 Dilution, i.e. 1 Share 20× Wash buffer plus 19 Distilled water.
Three, Operation steps 1. Equilibration from room temperature 20min 2. Set up standard wells and sample wells, add different concentrations of standards to each standard well 50μL ; 3. The sample to be tested is added to the sample well 50μL ; 4. In addition to the blank wells, horseradish peroxidase ( HRP ) Labeled detection antibody 5. Discard the liquid, pat dry on absorbent paper, and fill each well with wash liquid ( 350μL ), let stand 1min , throw off the washing liquid, pat dry on absorbent paper, and repeat washing the plate 5 Times (the plate can also be washed with a plate washing machine). 6. Substrate added per well A 、 B Each 50μL , 37℃ Incubate in the dark 15min 。 7. Add stop solution to each well 50μL , 15min Inside, in 450nm Wavelength measurement of each well OD Value.
Calculation of experimental results Based on the tested standard OD The value is the abscissa, and the concentration value of the standard product is the ordinate. Draw the standard curve on coordinate paper or with relevant software, and obtain the linear regression equation. The sample OD Values are substituted into Eq., and the concentration of the sample is calculated. |
||||||||||||||||||||||||||||||
| Species Reactivity | Rat | ||||||||||||||||||||||||||||||
| Theory | The kit uses a double-antibody one-step sandwich enzyme-linked immunosorbent assay (ELISA). To the coated microwells pre-coated with rat parathyroid hormone (PTH) capture antibody, specimens, standards, and HRP-labeled detection antibodies were sequentially added, incubated and thoroughly washed. The color is developed with the substrate TMB, which is converted to blue under the catalysis of peroxidase and to the final yellow under the action of acid. There was a positive correlation between the depth of color and rat parathyroid hormone (PTH) in the sample. The absorbance (OD value) was measured with a microplate reader at a wavelength of 450nm, and the sample concentration was calculated. | ||||||||||||||||||||||||||||||
| Source | Rat | ||||||||||||||||||||||||||||||
| Synonym | Rat Parathyroid Hormone (PTH) Kit (ELISA) | ||||||||||||||||||||||||||||||
| Composition |
remark : 1. The standard concentrations are as follows: 2000 、 1000 、 500 、 250 、 125 、 62.5 pg/mL 2. After inspection of a large number of normal specimens, the normal concentration values of the specimens are all within the detection range provided by the kit, which are directly taken during the experiment 50μL Just load the sample. When some sample values exceed the maximum standard concentration, the sample can be appropriately diluted with sample diluent before conducting the experiment. |
||||||||||||||||||||||||||||||
| General Notes |
1. Incubate in strict accordance with the specified time and temperature to ensure accurate results. All reagents must reach room temperature 20-25 °C prior to use. Store reagents in refrigeration immediately after use. 2. Incorrect plate washing can lead to inaccurate results. Make sure to drain the liquid from the wells as much as possible before adding the substrate. Do not allow the wells to dry out during incubation. 3. Eliminate the residual liquid and fingerprints at the bottom of the plate, otherwise it will affect the OD value. 4. The substrate color development solution should be colorless or very light in color, and the substrate solution that has turned blue cannot be used. 5. Avoid cross-contamination of reagents and specimens to avoid wrong results. 6. Avoid direct exposure to strong light during storage and incubation. 7. After equilibrating to room temperature, open the sealed bag to prevent water droplets from condensing on the cold slats. 8. Any reaction reagent cannot come into contact with the bleaching solvent or the strong gas emitted by the bleaching solvent. Any bleaching component will destroy the biological activity of the reaction reagents in the kit. 9. Expired products cannot be used. 10. If it is possible to spread diseases, all samples should be managed, and the samples and testing devices should be handled according to the prescribed procedures. |
||||||||||||||||||||||||||||||
| Storage Temp. | Unopened kit, stored at 4 °C, shelf life 6 months. | ||||||||||||||||||||||||||||||
| Test Range | 62.5 pg/mL-2000 pg/mL; Sensitivity: The lowest detection concentration is less than 10 pg/mL. |

