Product Details
Product Details
Product Specification
| Stability & Storage | Dry ice transport. Store protected from light at −20°C or below; for long-term storage (>3 months), we recommend −80°C. Refer to the reagent vial label for the expiration date. After first use, it is recommended to store the reagent at 4°C for short-term use (within 2 weeks); for long-term storage, aliquot into single-use portions and store protected from light at −20°C or below. |
Background
PAB protein (Protein of Antibody Binding, MW 25 kDa) contains the IgG Fc-binding domain derived from Protein G and can be coupled with dyes through appropriate conjugation reactions, without affecting the specific binding between PAB and the IgG Fc fragment. PAB conjugated with a pH-sensitive dye can serve as a universal reagent for binding human or mouse IgG antibodies, enabling the study of antibody internalization or phagocytosis in target cells.
Thermo Fisher's pHrodo Red dye is a pH-sensitive fluorescent dye that exhibits very low fluorescence in neutral or alkaline environments, but its fluorescence significantly increases when the solution becomes acidic. The excitation wavelength (Ex) of pHrodo Red is 560 nm, and the emission wavelength (Em) is 587 nm; its fluorescence can be detected using TAMRA or Cy3 filters.
The PAB-pH Red labeling kit includes the PAB-pH Red reagent, which is a PAB-pHrodo Red complex formed by covalently coupling Thermo Fisher's pHrodo Red to PAB via primary amine groups. PAB-pH Red can serve as a universal binding reagent for human or mouse IgG antibodies, and fluorescence detection of the antibody-PAB-pH Red complex reflects the efficiency of antibody internalization or phagocytosis. The PAB-pH Red IgG labeling reagent is easy and rapid to use, allowing antibody labeling in as little as 5 minutes; the labeled antibodies do not require purification and can be directly applied to subsequent internalization or phagocytosis assays.
Components
PAB-pH Red IgGThe specifications of the labeling kit are as follows. Among them, labeling…IgGQuantity according toPAB MW 25 kDa,IgGAntibodyMW 150 kDa, the molar ratio of the two markersFor5:1Calculation.
Specifications |
Reagent volume |
Reagent concentration (withPABCalculation) |
Can be labeledIgG |
250mul |
2x125μL |
250 μg/mL |
seventy-fiveμg |
1.2 ml |
2x600μL |
250mugmL |
350μg |
Protocol
According toPAB MW 25 kDaandIgGAntibodyMW 150 kDaCalculation,IgGandPAB-pH RedMolar ratio1:3to1:5Labeling can meet the needs of most experiments, and the molar ratio can also be optimized according to the specific experimental requirements to enhance the detection signal intensity. The following experiments use…TrastuzumabandPAB-pH RedMolar ratio1:5Detection after complex formationTrastuzumabIn expressionHER-2ofSK-BR-3The endocytic effect of cells.
1)At96For black, transparent cell culture plates.McCoy's 5A (10% FBS)Inoculate each well of the culture medium.100mul,4,000oneSK-BR-3cell,37°C5% CO2 Incubated overnight in an incubator.
2)Preparation10xTest concentrationTrastuzumab-PAB-pH RedComplex: As required by the experimentTake an appropriate amount.Opti-MEM ICulture medium dilutionTrastuzumabTo55mug/mL. To100muLof55mug/mL TrastuzumabJoin18muLof250mug/mL PAB-pH Red, like thisTrastuzumabandPAB-pH Redthe concentration(10x)Approximately300 nMand1500 nM, mix by blowing and shaking, incubate at room temperature30 minutes.PAB-pH RedIt is recommended for short-term use after the first application.(2 weeks) 4°CStore away from light; for long-term storage, divide into single-use portions and keep protected from light.-20°CSave below and including this level
3)Take outSK-BR-3Experimental cell plates, add to each well:10muLThe above-preparedAftertuzumab-PAB-pH RedComplex, mix by low-speed shaking plate. According toTrastuzumabCalculationTrastuzumab-PAB-pH RedThe final concentration of the complex is30 nM
4)37℃5%CO2Incubate in a CO2 incubator, and multiple time points can be set for detection, such as0 hr,2 hr,4 hr,6 hr,12 hr,24 hrand so on. The optimal detection time needs to be optimized based on the specific experiment. Generally, it is recommended to start detecting the endocytosis effect after incubating for at least2 hr
5)Use instruments for fluorescence detection to performfluorescencedetection, such as fluorescence microscopes, flow cytometers, high-content imaging systems, fluorescence plate readers, etc., to detect fluorescence in cells.pHrodo Reddye'sExis560 nm,Emis587 nm,you can useTAMRAorCy3fluorescence channels for detection; for specificEx/Emsettings, please refer to the instrument manual.
Guidelines
2) Unless rigorously validated, do not alter the volume of the reagent used for testing.
3) For research use only.
4) pHrodo is a registered trademark of Thermo Fisher Scientific.
