Product Details
Product Details
Product Specification
| Stability & Storage | Dry ice transport. Store protected from light at −20°C or below; for long-term storage (>3 months), we recommend −80°C. Refer to the reagent vial label for the expiration date. After first use, it is recommended to store the reagent at 4°C for short-term use (within 2 weeks); for long-term storage, aliquot into single-use portions and store protected from light at −20°C or below. |
Background
PAB protein (Protein of Antibody Binding, MW 25 kDa) contains the IgG Fc-binding domain derived from Protein G and has a cysteine residue at its C-terminus. Under reducing conditions, the C-terminal cysteine of PAB becomes a reduced thiol group. Through an appropriate coupling reaction, a pH-sensitive dye can be specifically attached to this thiol group. This site-specific conjugation does not interfere with the specific binding between PAB and the IgG Fc region. PAB conjugated with a pH-sensitive dye can serve as a universal reagent for binding human or mouse IgG antibodies, enabling the study of antibody internalization or phagocytosis in target cells.
Thermo Fisher's LysoLight Green dye is a lysosome-specific fluorescent dye. Outside of lysosomes, LysoLight Green exhibits almost no detectable fluorescence; however, once it localizes to lysosomes rich in specific cathepsins, LysoLight Green is cleaved and activated by these enzymes, emitting bright fluorescence. The excitation wavelength (Ex) of LysoLight Green is 488 nm, and the emission wavelength (Em) is 525 nm, allowing its fluorescence to be detected using FITC filters.
The PAB-LysoGreen IgG labeling kit includes the PAB-LysoGreen reagent, which is a PAB-LysoLight Green complex formed by site-specific conjugation of Thermo Fisher's LysoLight Green to the reductive sulfhydryl group at the C-terminus of PAB. PAB-LysoGreen can serve as a universal binding reagent for human or mouse IgG antibodies, and fluorescence detection of the antibody-PAB-LysoGreen complex allows assessment of the efficiency of antibody internalization or phagocytosis into lysosomes. The PAB-LysoGreen IgG labeling procedure is simple and rapid, enabling antibody labeling in as little as 5 minutes; the labeled antibodies do not require purification and can be directly used in subsequent cellular internalization or phagocytosis experiments.
Components
PAB-LysoGreen IgGThe specifications of the labeling kit are shown below. Among them, labeling…IgGQuantity according toPAB MW 25 kDa,IgGAntibodyMW 150 kDa, the molar ratio of the two markersFor5:1Calculation.
Specifications |
Reagent volume |
Reagent concentration (withPABCalculation) |
Can be labeledIgG |
250mul |
2x125μL |
250 μg/mL |
seventy-fiveμg |
1.2 ml |
2x600μL |
250mugmL |
350μg |
Protocol
According toPAB MW 25 kDaandIgGAntibodyMW 150 kDaCalculation,IgGandPAB-LysoGreenBy molar ratio1:3to1:5Labeling can meet the needs of most experiments, and the molar ratio can also be optimized according to the specific experimental requirements to enhance the detection signal intensity. The following experiment usesTrastuzumabandPAB-LysoGreenMolar ratio1:5Detection after complex formationTrastuzumabIn expressionHER-2ofSK-BR-3The endocytic effect of cells.
1)At96For black, transparent cell culture plates.McCoy's 5A (10% FBS)Inoculate each well of the culture medium.100muL,4,000oneSK-BR-3cell,37°C5% CO2 Incubated overnight in an incubator.
2)Preparation10xTest concentrationTrastuzumab-PAB-LysoGreenComplex: As required by the experimentTake an appropriate amountOpti-MEM IDilute in culture mediumTrastuzumabto55μg/mL. To100μLof55μg/mL Trastuzumabadd18μLof250μg/mL PAB-LysoGreen, thusthe concentrations ofTrastuzumabandPAB-LysoGreen(10x)are approximately300 nMand1500 nM, mix thoroughly by pipetting, and incubate at room temperaturefor30 minutes.It is recommended that after the first use ofPAB-LysoGreen, it be stored for a short term(2 weeks) at 4℃in the dark; for long-term storage, aliquot according to single-use amounts and store in the darkat -20℃or below
3)Take outSK-BR-3experimental cell plates, and add to each well10μLof the above-preparedTrastuzumab-PAB-LysoGreenComplex, mix by low-speed shaking plate. According toTrastuzumabCalculationTrastuzumab-PAB-LysoGreenThe final concentration of the complex is30 nM
4)37°C5%CO2Incubation in an incubator allows for the setting of multiple time points for measurement, for example:0 hours,2hr,4hr,6hr,12hr,24hretc.; the optimal detection time should be optimized based on the specific experiment. It is generally recommended to incubate for at least2hrThen begin to assess the endocytosis efficiency.
5)Using instruments that employ fluorescence detectionFluorescenceDetection of fluorescence in cells is performed using instruments such as fluorescence microscopes, flow cytometers, high-content imaging systems, and fluorescence plate readers.LysoLightof the dyeExampleFor488nm,EmFor525nm,Can be usedFITCFluorescence channel detection, specificallyEx/EmRefer to the instrument's manual for settings.
Guidelines
Do not alter the amount of test reagent without rigorous validation.
For research use only.
