Skip to product information
1 of 1

UA-Glo® NAD(P)H Detection System

UA-Glo® NAD(P)H Detection System

Catalog Number: UA079042 Brand: UA BIOSCIENCE
Price:
Regular price $220 USD
Regular price Sale price $220 USD
Size:

For shipping services or bulk orders, you may request a quotation.
Secure checkout with
View full details

Product Details

Product Specification


Stability & Storage

Dry ice transport. After receiving the kit, store it protected from light at-80℃.The expiration date is indicated on the reagent bottle label.After first use, aliquot the reagents and store them protected from light;the reductase substrate should be stored at -80℃,,and the NAD(P)H detection solution should be stored at -20℃or below; for long-term storage (>2 months), keep it at-80℃. After the reagents are used for the first time,they should not be subjected to more than 3 freeze-thaw cycles..

Background

NADH and NADPH (hereinafter collectively referred to as NAD(P)H) are reactants or products in many enzymatic reactions. By quantitatively measuring NAD(P)H, the activity of numerous enzymes can be determined directly or indirectly. The UA-Glo® NAD(P)H Assay Kit employs a coupled reaction involving a reductase and luciferase: the reductase can equivalently utilize either NADH or NADPH as a substrate, converting the reductase's substrate into luciferin via NAD(P)H. Luciferin is then converted into light by luciferase, which is detected; the intensity of the emitted light is proportional to the amount of NAD(P)H consumed or produced in the in vitro enzymatic reaction. Moreover, this coupled reaction does not detect nor is it affected by the oxidized form of NAD(P).

UA-Glo® NAD(P)H assay reagent is a homogeneous reagent that requires only a single addition for detection, thereby reducing experimental errors that may arise from multiple procedural steps. This reagent features a high signal-to-noise ratio, excellent reproducibility, and superior stability. Its stable luminescent signal (half-life > 2 hours) makes it particularly well-suited for high-throughput screening of enzyme inhibitors.

Components

UA-Glo® NAD(P)HThe components and specifications of the test kit are shown in the following table. Detectable96/384-The number of reactions per plate is calculated based on the enzyme reaction volume per well.96/384-plate50μL / 20μL, calculate by adding an equal volume of the test reagent.

Specifications

Components and specifications

96-number of reactions per plate

384-number of reactions per plate

10 ml

NAD(P)Hdetection solution:10 mL

reductase substrate: 50μL

200

500

50 ml

NAD(P)Hdetection solution: 50 mL

reductase substrate: 250μL

1,000

2,500


Protocol

Reagent Preparation and Storage (Reference: Storage Conditions):

UA-Glo® NAD(P)HPrepare the assay reagents fresh as needed; it is not recommended to store prepared assay reagents. During the assay, add an equal volume of the assay reagent to the enzyme reaction mixture; calculate the required volume of assay reagent accordingly..

1)First Use:-80°CrefrigeratorRemoveNAD(P)Hassay solution and reducing enzyme substrate

2)NAD(P)HAfter thawing the assay solution at room temperature, mix well and take the required amount. The remaining assay solution should be immediately aliquoted and stored frozen at-20℃or lower. For long-term storage(>2months)it can be stored at-80°Cto avoid repeated freeze-thaw cycles.

3)The concentration of the reducing enzyme substrate is200x; after thawing, take the required volume and add it to theNAD(P)Hassay solution.The remaining reducing enzyme substrate should be immediately aliquoted and stored at-80°Cto avoid repeated freeze-thaw cycles.

4)NAD(P)HReagent preparation: The concentration of the reductase substrate is200x, add it according to this ratioNAD(P)HPrepared in the detection solution asNAD(P)HTesting reagents, for example1 mL NAD(P)HAdd to the detection solution5muLReductase substrate. Invert and mix the reagent. Recommended.NAD(P)HUse the test reagent immediately after preparation.

NAD(P)HDetection

1)Consume or generate according to experimental requirements.NAD(P)HEnzymatic reaction:

a)It is recommended to use a white, opaque experimental plate for enzymatic reactions.Reaction volume96The orifice plate experiment is forFiftymuL,384The orifice plate experiment is for25muL, or other appropriateEnzymatic reaction volume; during the assay, add a volume equal to the enzymatic reaction volume.NAD(P)HTesting reagents are sufficient.

b)Avoid in enzymatic reactionsDTTand reducing agents. Reducing agents may react with the reductase substrate, thereby increasing the assay background.

2)NAD(P)HBefore testing, the assay plate should be equilibrated to room temperature. The luciferase reaction is sensitive to temperature changes. Both the assay reagents and the assay plate must be brought to room temperature, and the temperature should be kept constant throughout the assay. (±1°C)

3)Add to each well of the experimental plate.Equal volumes of enzymatic reactionsNAD(P)HTesting reagent

4)Medium-speed vibration plate30s, incubate in the dark40-60 minutesStable luminescence signal

5)Luminescence signals can be read on a luminometer or a multifunctional microplate reader.2-3 hoursInternal readout panel. The luminous signal is approximately at60minReach the peak, signal half-life2hr.NAD(P)HAdd the test reagent.Enzyme reactions typically terminate most enzymatic activities, butCertain enzymes can continue to catalyze reactions after the addition of the assay reagents; if it is necessary to terminate such reactions,The enzymatic reaction is carried out to obtain a stable signal, which can be used inNAD(P)HDetection reagentAdd thisAfter adding the enzyme-specific inhibitorThe enzyme reaction is then detected.

Guidelines

1) It is not recommended to mix reagents from different batches.
2) Without rigorous validation, it is not recommended to alter the volume of test reagents used.
3) For research use only.